SETTING DMZ IN THE ROUTER

SETTING DMZ IN THE Linksys ROUTER

Launch your Internet Explorer 5 or later version or Netscape Navigator 4 or later version.
On the Address, Search or URL, type: http://192.168.1.1, then hit Enter/Return. A login screen will appear. Type admin for the password and leave the username blank or empty then hit “OK”.

Note: If it doesn’t take admin as the password you might have changed it when you have ran the RUN ME FIRST CD that came with the router so try other passwords.

If you cannot remember the password, I regret to tell you but, you have to reset the router and, reconfigure it again. Next time, remember the password to avoid unnecessary reset and reconfiguration.

To reset the router to factory default 1] Press and hold the reset button for 30 sec., after that 2] Unplug the power keep holding down the reset button for another 30 sec. 3] Then, plug back the power keep holding down the reset button for 30sec., after that 4] Release the reset button.

Note: Setting the pc in DMZ in the router varies depending on the model number and firmware version of your Linksys Router.

Cisco Interface (If your Setup page has a Cisco Logo)

- Click on the Applications and Gaming Tab > DMZ > Enable DMZ and enter the last octet of the LAN IP address of the computer behind the router that has the special application you wish to run.

Regular Linksys Router Interface (If your Setup page has a no Cisco Logo)

- Click on the Advance Tab > DMZ Host Tab > Enter the last octet of the LAN IP address of the computer behind the router that has the special application you wish to run.

Regular Linksys Router Interface (WRT54G) (If your Setup page has a no Cisco Logo)

- Click on the System Tab > Enable DMZ > Enter the last octet of the LAN IP address of the computer behind the router that has the special application you wish to run.